4m level cut pile tufting carpet machine high speed 5/64"gauage customization

Technical Description                                          
The body housing is full cast frame, main mechanical drive parts all NSK and IKO bearings of Japan  brand, adopts 45# steel modulation polishing shaft.
Gauage:5/64" GG                                          
Pile: cut pile                                            
Effective width of carpet is 4-5m                                            
Straight single needle structure needle beam                                            
Variable frequency adjustable motor                                            

Pile height adjustable is very convenient and operator friendly. Operators need to release the Hydraulic pressure

by turning the button, loose the nuts a bit and by touch of a button can increase and decrease the bed plate by

motor. Hydraulic pressure of the bed plate is maintained and monitored by the PLC itself.with Hydraulic pressure to

run at High RPM.

Adjustable stroke                                            
Weight: About 13 tons                                            
Total Power: 57KW, 360-415 VAC 3Phase 60Hz                                            
Pile Height range: 5-30mm                                            
Machine speed: 800-1200 RPM

Stitch Length: 10-60 stitch per 10cm                                            
Include 1 set of Double servo backing control system, easy to adjust stitch by software                                            
one set of double yarn feeding roller                                            
Start control cabinet, soft start/stop, High Parking, Fault indication, meter counter, Configure front  pull switch, front photoelectric switch              
1set of Yarn collecting plate,
Include 1260pcs needles, hook,knife blades, forks according to 4m configuration. each 10pcs spare parts of needles,hooks and forks,knife blades
( One set of control cabinet and software)                                            
with mending frame and winding device  
2x1260 ends creels                                        
one set tool kit